Trusted spray foam roofing & insulation services for Tacoma, WA property owners. Licensed, insured, and backed by manufacturer warranties.
Professional roofing, coating, and insulation services for Tacoma property owners and facility managers.
Metal roofs leak at fasteners, seams, and panel overlaps. Our coating systems bridge and seal every one of these failure points while adding a reflective finish that reduces surface temperatures and cooling costs significantly.
Large-scale commercial roof restoration using SPF and coating systems that extend roof life by 20 or more years without the cost and disruption of full replacement. Phased scheduling available to keep your business operational.
Complete roof restoration with spray foam and protective coatings that add 20 or more years of life to your existing roof — without the cost, waste, and disruption of a full tear-off and replacement.
Roof leaks get worse with every rain. Our crews respond fast, identify the exact source using infrared and moisture mapping, and apply permanent repairs using spray foam and coating systems designed for long-term performance.
Closed-cell and open-cell spray foam attic insulation that eliminates air infiltration and creates a continuous thermal barrier from ridge to eave. Most projects completed in a single day with immediate comfort improvement.
Complete SPF roof systems for commercial and residential buildings. Our factory-trained crews apply closed-cell foam directly to your roof deck, creating a monolithic waterproof membrane that eliminates seams, joints, and the leak points they create.
When severe weather damages your roof, our storm response crews deploy fast — securing your property, documenting every impact point for your insurance claim, and restoring your roof with quality materials and expert workmanship.
Seamless waterproofing membranes applied over existing roof surfaces to eliminate leaks and ponding water permanently. Our spray-applied systems conform to every detail and create a monolithic barrier with no seams to fail.
Comprehensive roof inspections using infrared moisture scanning, core sampling, and visual assessment. Detailed photo-documented reports with condition ratings, remaining life estimates, and prioritized repair recommendations.
Stop chasing flat roof leaks with temporary fixes. Our diagnostic approach pinpoints the exact failure point, and our repair methods address the root cause — whether it is failed flashing, membrane damage, or ponding water that needs re-sloping.
High-performance silicone roof coatings that resist ponding water, UV degradation, and extreme temperatures. Unlike acrylics, silicone does not re-emulsify in standing water — making it ideal for flat roofs with drainage challenges.
From minor surface patches to full-section refoaming and recoating, our repair crews restore SPF roof performance using materials compatible with your existing system. Every repair is blended seamlessly and warranted.
Our maintenance programs extend roof life and reduce total cost of ownership. Semi-annual or annual visits include drain clearing, seam inspection, penetration checks, coating condition assessment, and immediate repair of minor issues.
Our replacement process is thorough: remove existing roofing to the deck, inspect and repair substrate, apply closed-cell SPF to specified thickness, and finish with a UV-protective coating. The result is a monolithic roof system with no seams to fail.
Cold floors, musty smells, and high energy bills often trace back to an uninsulated or poorly insulated crawl space. Our closed-cell spray foam seals the entire crawl space envelope — walls, rim joists, and sill plates — creating a conditioned space.
The Tacoma metro area contains some of the highest energy costs per square foot in Washington. Lapolla Industries addresses this with spray polyurethane foam — the most thermally efficient roofing and insulation system available. Our SPF installations across the Tacoma area consistently deliver 25 to 40 percent reductions in HVAC energy consumption for commercial and residential properties alike.
What makes spray foam different from every other insulation material is its dual role as both insulator and air barrier. In Tacoma buildings where air leakage through conventional assemblies can account for 40 percent of total energy loss, a spray foam system pays for itself through savings alone — often within 3 to 5 years. Lapolla Industries has the Washington track record to prove it.
Quality, integrity, and results — the Lapolla Industries difference for Tacoma property owners.
Lapolla Industries has been at the forefront of spray polyurethane foam technology since 2003 — with deep roots in SPF manufacturing and application that few competitors can match.
Our crews live and work in the communities we serve. We understand local building codes, climate conditions, and the best SPF systems for your specific region.
SPF roofing delivers the highest R-value per inch of any commercial insulation. Our customers typically see 20 to 40 percent reductions in heating and cooling costs after installation.
SPF roofing and coating can be applied over existing roof systems without tear-off — no demolition noise, no debris, and no business interruption during installation.
Every project starts with a no-obligation inspection using infrared moisture scanning and visual assessment. We identify every issue and provide an honest, transparent estimate.
Common questions about spray foam roofing and insulation in Tacoma, WA.
Spray foam is one of the best solutions for flat and low-slope roofs in Tacoma. The seamless application eliminates the seams and joints where conventional flat roof systems fail. SPF also self-levels to eliminate ponding water — one of the biggest causes of flat roof leaks and premature failure.
Spray foam insulation costs in Tacoma typically range from $1.50 to $3.50 per square foot for open-cell and $3.00 to $7.00 per square foot for closed-cell. The exact price depends on the area being insulated, foam thickness, and accessibility. Most Tacoma homeowners see a full return on investment through energy savings within 3 to 5 years.
Yes. Spray foam applied to crawl space walls and rim joists creates an airtight moisture barrier that eliminates condensation, musty odors, and cold floors. For Tacoma homes with persistent crawl space moisture issues, closed-cell foam combined with vapor barrier encapsulation provides a permanent solution.
In most cases, yes. One of the biggest advantages of SPF roofing is that it can be applied directly over existing roof membranes — TPO, EPDM, built-up, and even metal — without a costly tear-off. Our Tacoma crews evaluate the existing substrate to ensure it is structurally sound before application.
Yes. Spray foam roofing provides the highest R-value per inch of any commercial roofing insulation — typically R-6.5 per inch. In Tacoma, this translates to significant cooling and heating savings because the seamless membrane eliminates air infiltration that accounts for up to 40 percent of energy loss in conventional roofs.
Call us immediately for emergency tarping to prevent further water damage. Our Tacoma storm damage crews respond quickly to secure your property, document all damage with photos and measurements for your insurance claim, and provide a complete restoration plan. We work directly with insurance adjusters to ensure your claim is handled smoothly.
Honest feedback from property owners who trusted Lapolla Industries with their spray foam projects.
"Our corrugated metal roof was rusting at every fastener and seam. They cleaned the entire surface, treated the rust, and applied a thick elastomeric coating. The roof looks brand new and is completely sealed now."
"Had spray foam applied to our flat commercial roof and the difference is night and day. No more ponding water, energy bills dropped noticeably, and the seamless membrane means zero leak points. Should have done this years ago."
"We converted our old built-up roof to spray foam and could not be happier. The insulation value alone has cut our HVAC costs significantly. The crew explained every step and left the site spotless."
Lapolla Industries proudly serves property owners in these cities near Tacoma.